STANDARD PULLEY BLOCK K10, K11, K12, K15

Standard pulley blocks serve as mobile tools during installation, repair and other work. They are used for lifting and towing loads in any direction by manually pulling on the rope, but usually using an engine driven windlass. The K10 – K12 type pulley blocks are intended for textile rope, the K15 type for steel rope (the rope are not part of the product).

Features:

• all parts made of steel and cast iron,
• solid and simple construction,
• simple operation and assembly,
• minimum maintenance requirements,
• the pulley consists of two slopes - the upper and the lower block,
• each block has one to three discs,
• on the upper block there is a hook for fixing the supporting part of the rope,
• the rope is not included in the set,
• pulleys type K10, K11 and K12 are designed for hemp and polyamide (textile) ropes with a safety factor of 7,
• pulleys, type K 15 are designed for steel ropes with a safety factor of 5,
• capacity: 0,5 - 6t,
• the construction of the lift meets the requirements specified by the Directive of the European Parliament and the Council of Europe 2006/42/ES

Use:

• for assembly and repair work,
• for lifting, moving and lowering loads.